LEAKDRY RhinoSkinz ATV/UTV JACKET for Men-Black&Grey Camouflage

$229.00 USD
Size Jacket
Size
Key Features
  • 100% Waterproof
  • 100% Mudproof
  • Windproof
  • Highly Breathable
  • Anti-Bacterial
  • Moisture-Wicking
Wash Care

1. WASHING

  • Like everything, gear loses its useful properties with each wash. Try to minimize the number of washes and the gear will last a long time.
  • Clean your gear from adhering dirt and rinse under running water.
  • Washing by hand:
  • To remove minor impurities, it is enough to use ordinary soap, a soft bristle brush or a sponge.
  • In a washing machine:
  • “Membrane fabric” or “Hand wash" mode in cold water with a thorough rinse.
  • Use only special detergents for membrane fabrics (do not use laundry detergents, conditioners and bleaches)
  • do not wring
  • do not use dry cleaning

2. DRYING

  • After washing turn the gear inside out and hang it to dry in a well-ventilated area.
  • After drying the inside, turn it inside out again and leave it to dry completely.
  • Do not dry gear near bonfires, heaters and in direct sunlight.

3. PROPER STORAGE

  • If possible, store the gear flat, upright, in a dry and ventilated area
  • Use clothing covers to protect the membrane from dust. The dust clogs the membrane structure and "blocks" breathing.
  • Pay attention to creases: do not leave them during storage. Creases can damage protective layers, which lead to micro cracks on it and decrease effectiveness of gear.

SNOMAN_ATV * LEAKDRY

LEAKDRY and snoman_atv's 2024 custom collaboration waders are designed for extreme off-road riding, built to withstand long-term wear and tear. With minimized seams in high-stress areas and reinforced construction, they offer the highest level of protection against abrasion, cuts, and punctures.

Featuring a new three-layer composite structure, the outer fabric has been redesigned (removing the TEFLON® coating to reduce the potential harm of chemicals to human health and the environment), combined with a UK-imported waterproof and breathable membrane (fluorine-free and recyclable), and DURAABLR ultra-abrasion-resistant fabric. Additional reinforcements ensure exceptional durability, with every seam and zipper securely bonded. The 3D articulated knee design, elastic suspenders, and YKK buckle waist belt provide comfort and support. The large chest pocket comes with a strong zipper and protective flap, with an additional flip-out chest pocket featuring a waterproof zipper. Drying loops, built-in 4mm neoprene booties with reinforced soles complete the design.

Recommended for: Waterproof and mudproof waders for both men and women
Ideal for outdoor activities: Fishing, ATV/UTV sports, hunting

LEAKDRY Three Layer System

· BETTER FIT TO THE BODY
· IMPROVED STRETCHABILITY
· LIGHTER

- Reinforced abrasion-resistant outer fabric
- Waterproof & Breathable membrane
- Inner linning

DETAILS
SIZE CHART
PRODUCT CARE
DETAILS
RHINO-SKINZ BG101 camouflage Jacket
The RHINO SKINZ Jacket are designed for ATV/UTV riding, fishing, and hunting, offering exceptional protection and comfort. With LEAKDRY's three-layer composite technology and a waterproof, breathable hydrophilic membrane to keep you dry and comfortable in muddy, wet conditions, allowing you to focus on your outdoor adventure.
LEAKDRY Three-Layer Protection
For the first time, LEAKDRY has applied the design concepts and technology of waterproof socks to a waterproof, breathable wader. The middle layer uses the UK-made Porelle hydrophilic waterproof breathable membrane, enhancing the stretch of the jacket fabric. Paired with a durable outer layer, RHINO SKINZ Jaackets are 100% waterproof while remaining breathable, moisture-wicking, and ensuring both comfort and durability.
Ultimate Durability and Comfort
Reinforced knees and seat areas, along with a seamless crotch design, prevent wear and leaks. A Teflon® coating enhances water resistance, while built-in D-rings and neoprene booties ensure a secure and comfortable fit.
Built for the Outdoors
The RHINO SKINZ Jackets combine comfort, durability, and functionality. Expertly designed and tested, they ensure you stay dry and focused on your adventure, even in the harshest conditions.
Specification
Gender: Unisex
Material: Hydrophylic Membrane
Zipper: YKK
Membrane layers: Three
Waterproofness: >20,000 mm ISO 811:2018
Breathability: 8,000 g/m2/24h
FEATURES
SIZE CHART
1. Height
Stand straight with back flat against the wall, keeping the chin parallel to the floor. Measure the distance from the floor to the top of your head.
2. Chest girth
Wrap the tape measure under the armpits across the widest part of your chest.
3. Waist girth
Stand up straight. Find the bottom of your ribs and the top of your hips. Wrap the tape measure at a level halfway between them. Make sure it’s pulled tight, but isn’t digging into your skin.
4. Hips
Place your feet together. Wrap the tape measure around the widest part of your hips.
5. Inseam
Measure the length between your crotch and the bottom of your ankle (or the expected bottom of pants).
6. Sleeve
Measure from the center back of your neck (at your spine) along your shoulder and elbow to the wrist.
CENTIMETRES
Switch the measurement system here
Jacket Size
Jacket wear size correspond to your everyday clothing. To calculate it, measure your chest and waist girth, inseam from crotch to ankle, sleeve from shoulder to wrist, and height. Match the measurements to the size chart.
US
XXXS
XXS
XS
XSK
S
SK
SL
M
MK
L
LK
XL
XXL
Height(cm)
155-165
160-170
165-175
165-175
170-180
170-180
180-190
175-185
175-185
180-190
180-190
185-195
190-200
Chest girth(cm)
80-86
84-90
88-98
100-110
96-102
108-117
96-102
100-110
119-125
108-117
124-133
116-125
124-133
Waist girth(cm)
70-76
74-80
78-88
90-100
86-92
98-107
86-92
90-100
106-115
98-107
114-123
106-115
114-123
Hips(cm)
82-88
86-92
90-100
102-112
98-104
110-119
98-104
102-112
118-127
110-119
126-135
118-127
126-135
Inseam(cm)
68-74
71-77
74-80
74-80
77-83
77-83
83-89
80-86
80-86
83-89
89-89
86-92
89-95
Sleeve(cm)
53-57
55-59
57-61
57-61
59-63
59-63
63-65
61-64
61-64
63-65
63-65
64-67
65-69
PRODUCT CARE
HOW TO TAKE CARE OF MEMBRANE GEAR
WASHING
Like everything, gear loses its useful properties with each wash. Try to minimize the number of washes and the gear will last a long time. Clean your gear from adhering dirt and rinse under running water.
Washing by hand:
To remove minor impurities, it is enough to use ordinary soap, a soft bristle brush or a sponge.
In a washing machine:
“Membrane fabric” or “Hand wash" mode in cold water with a thorough rinse.
* Use only special detergents for membrane fabrics (do not use laundry detergents, conditioners and bleaches)
* do not wring do not use dry cleaning
DRYING
After washing turn the gear inside out and hang it to dry in a well-ventilated area.
After drying the inside, turn it inside out again and leave it to dry completely.
Do not dry gear near bonfires, heaters and in direct sunlight.
PROPER STORAGE
If possible, store the gear flat, upright, in a dry and ventilated area Use clothing covers to protect the membrane from dust. The dust clogs the membrane structure and "blocks" breathing. Pay attention to creases: do not leave them during storage. Creases can damage protective layers, which lead to micro cracks on it and decrease effectiveness of gear.